Composition:
| Tebuconazole (alfa)[2-(4-clorofenil)etil]alfa)[-1-dimetiletil) -1H-1,2,4-triazol-1 etanol | 25 % (p/v) |
| Inerts | 75 % (p/v) |
Chemical group:
TRIAZOLE
Formulation:
EMULSIFIABLE CONCENTRATE (EC).
Overview:
TRICUR is a fungicide of systemic action, that inhibits the biosynthesis of ergosterol in fungi, preventing its development and multiplication.
Application method:
Fill the tank with water, add the product according to the recommended doses, and fill up to the final volume keeping the stirring.
In bananas: use mineral oil in the liquid at the rate of 1 to 2% of the total volume, reaching to volumes of 10 to 15 l/ha in aerial applications. For the rest of the crops, use volumes of 100 to 200 l/ha in land applications and not less that 20 to 40 l/ha in aerial application.
Phytotoxicity and compatibility:
TRICUR is not phytotoxic for the recommended crops, to the indicated dose. Is incompatible with alkaline-reaction products.
Precautions:
Avoid applications at times of increased heat, insolation and/or low relative humidity. Liquid’s volume: 120 – 150 l/ha depending on the crop development. In soybeans, either must be applied in mixture with mineral oils or vegetables and in periods of drought.
Re-entry time to the area of treatment:
24 hours. If the re-entry is necessary before term, do it by employing personal protective equipment.
Toxicological class:
Class IV – Green Stripe.
Antidote:
Does not have.
Packaging:
1- Boxes of 24 containers of 250 ml.
2- Boxes of 12 containers of 1 lt.
3- Boxes of 4 containers of 5 lt.
Fungicides
Directions for use:
Diseases:
Garlic Rust / Puccinia allii
Purple blotch / Alternaria porri
Dose: 750 ml/ha
Time of Application: When the first symptoms show up. Repeat every 15 days (maximum 6 applications).
WP (days): 14
Diseases:
Early Blight / Cercospora apii
Septoria / Septoria apiicola
Dose: 400 ml/ha
Time of Application: Apply when the first symptoms show up and repeat every 14 days up to a maximum of 6 applications.
WP (days): 14
Diseases:
Stone Fruit Scab / Cladosporium carpophilum
Powdery Mildew / Oidium leucoconium
Dose: 75 ml/hl de agua.
Time of Application: Apply at the first symptoms and repeat 20 days after if the affected foliar area exceeds 10%.
WP (days): 20
Diseases:
Common Spot / Ramularia tulasnei
Dose: 75 ml/hl of water.
Time of Application: At the first symptoms. Repeat every 15 days.
WP (days): 5
Diseases:
Downy mildew / Plasmopara halstedii
Rust / Puccinia helianthi
Dose: 500 – 750 ml/ha
Time of Application: Apply when the pustules exceed 5% in the affected foliar area and repeat it provided this level is reached.
WP (days): 5
Diseases:
Rust / Puccinia spp.
Helmintosporiosis / Helminthosporium turcicum
Dose: 750 ml/ha
Time of Application: When the first symptoms show up. Repeat every 15 days (maximum 4 applications).
WP (days): 15
Diseases:
Late Leaf Spot / Cercosporidium personatum
Early Leaf Spot / Cercospora arachidicola
Dose: 500 ml/ha
Time of Application: At the first symptoms of diseases. Repeat at intervals of 7 days.
WP (days): 30
Diseases:
Powdery Mildew / Oidium spp.
Time of Application: Start the application with 50% of infection (foliar area). Repeat as needed.
Diseases:
Septoria / Septoria glycine
Cercospora / Cercospora spp.
Time of Application: At the beginning of seeding (stages 5,1 to 5,4). Repeat at the end of seeding.
Diseases:
Rust / Phakopsora pachyrhizi
Time of Application: Start the application with 50% of infection (foliar area). Repeat as needed.
Dose: 300 – 500 ml/ha
WP (days): 30
Diseases:
Leaf spot / Cercospora septoria spp.
Early blight / Alternaria solani
Dose: 750 ml/ha
Time of Application: At the first symptoms of diseases. Repeat every 14 days (maximum 3 applications).
WP (days): 7
Diseases:
Fusariosis / Fusarium gibberella
Dose 600 – 750 ml/ha
Time of Application: Apply preventively in full bloom.
Diseases:
Tan spot / Drechslera graminea
Helminthosporium / Bipolaris sorokiniana
Septoria / Septoria spp.
Rust / Puccinia spp.
Powdery mildew / Erysiphe graminis tritici
Dose: 600 – 750 ml/ha
Time of Application: At the early stages of infection (5%). Repeat 20 to 25 days later.
WP (days): 35
Diseases:
Powdery Mildew / Uncinula necator
Dose: 75 ml/hl of water
Time of Application: When the first symptoms show up. Repeat every 15 days (maximum 4 applications).
WP (days): 14
Diseases:
Powdery Mildew / Oidium erysiphoides
Downy Mildew / Pseudoperonospora cubensis
Dose: 750 ml/ha
Time of Application: When the first symptoms show up. Repeat every 15 days (maximum 4 applications).
WP (days): 14
WP: Waiting Period
Downloads
232 KB